Xuzhou, Jiangsu, China [email protected] WhatsApp +86 151 6223 2638
Website language
Metric · mm · kg · kWmm · kg · kW
Ditcher manufacturer product reference
Grading, Drainage & LandscapingAgricultural implement

Ditcher

A three-point-mounted rotary ditcher with a PTO-driven blade disc for cutting field drainage or irrigation ditches.

Product family
Grading, Drainage & Landscaping
Models
2 configurations
Request a QuoteChat on WhatsApp
Product & applications

About the ditcher

A three-point-mounted rotary ditcher with a PTO-driven blade disc for cutting field drainage or irrigation ditches.

Features & benefits

01

Rotary ditching disc

A geared drive rotates the blade disc to cut the ditch and move excavated soil to the sides.

02

Ditching and wall-cutting blades

Bent ditching blades and straight wall-cutting blades perform different parts of the cutting task.

03

Three-point connection

The frame mounts to the tractor’s rear three-point linkage.

Typical applications

Drainage-ditch cutting with a tractor-mounted rotary ditcher
Drainage-ditch cutting with a tractor-mounted rotary ditcher
  • Field drainage ditchesOpening suitable drainage channels to the selected top width, bottom width and depth.
  • Irrigation channelsCutting suitable agricultural water channels in ground that permits rotary blade operation.
Technical specifications

Models, dimensions and working requirements

ModelJY-1k-16-26JY-1k-30-20
Ditch width (mm)Top: 160; Bottom: 100Top: 300; Bottom: 120
Soil throw range (mm)Right: 1000; Left: 1000Right: 1000; Left: 1000
Ditch depth (mm)260200
Bent ditching bladesIT245,R: 6; L: 6IT245, R: 8; L: 8
Wall-cutting bladesStraight blade, R:2; L: 2Straight blade, R:2; L: 2
Overall dimensions (cm)109*125*116109*125*118
Blade disc diameter (cm)6960
Weight (kg)210220
Tractor power (HP)18-5518-55
Blade axle speed (rpm)252252
Mounting3 points mounted3 points mounted
Installation requirements

Confirm the implement fits your tractor

Before ordering, send the machine identification and the connection, power and working information relevant to this product.

  1. Tractor power and lift

    Check the listed tractor-power range, ditcher mass and rear lifting capacity.

  2. Three-point mounting

    Confirm hitch category, pin geometry and clearance around the disc and gearbox.

  3. PTO driveline

    Confirm PTO input, shaft length and guarding; the table’s rotary blade-axis speed is not the tractor PTO speed.

  4. Ditch and ground conditions

    Provide ditch top and bottom widths, depth, soil condition and underground-service information before work.

Product questions

Ditcher questions

Is this a chain trencher?

No. The 1K series uses a rotary blade disc, with bent ditching and straight wall-cutting blades.

What should I check at the PTO connection?

Confirm PTO input, shaft length and guarding; the table’s rotary blade-axis speed is not the tractor PTO speed.

What should I check before installation?

Check the listed tractor-power range, ditcher mass and rear lifting capacity. Confirm hitch category, pin geometry and clearance around the disc and gearbox.