Xuzhou, Jiangsu, China [email protected] WhatsApp +86 151 6223 2638
Website language
Metric · mm · kg · kWmm · kg · kW
Bale grab manufacturer product reference
Tractor Loaders & Handling ToolsAgricultural implement

Bale grab

A hydraulic bale grab for holding suitable bales between curved gripping arms.

Product family
Tractor Loaders & Handling Tools
Models
2 configurations
Request a QuoteChat on WhatsApp
Product & applications

About the bale grab

A hydraulic bale grab for holding suitable bales between curved gripping arms.

Features & benefits

01

Hydraulic closing arms

The arms close around the bale to hold it during loading and placement.

02

Greaseable pivot joints

Greaseable pins and bronze bushes at the cylinder ends allow the gripping mechanism to be lubricated.

03

Euro and SMS mounting

Separate frames connect the grab to compatible Euro or SMS loader interfaces.

Typical applications

Round-bale handling with a loader-mounted bale grab
Round-bale handling with a loader-mounted bale grab
  • Bale loadingPicking up and placing suitable round bales.
  • Bale storageMoving bales between storage and feeding areas.
Technical specifications

Models, dimensions and working requirements

Type

SWL/kg

Dimension (LWH)/mm

Opening Range (OR)/mm

Operating Pressure/MPa

Hydraulic Flow/LPM

Attachment

Weight/kg
JY-T-RBG170-EURO

2000

1430×1460×860

700-1800

16

60

EURO

236
JY-T-RBG170-SMS-C

2000

1430×1490×860

700-1800

16

60

SMS

234
Installation requirements

Confirm the tool fits your loader or tractor

Before ordering, send the machine identification and the connection, power and working information relevant to this product.

  1. Loader identification

    Provide loader make and model, attachment interface and the lifting chart for the intended working position.

  2. Attachment connection

    Match the actual Euro interface; compare SMS separately where a second mounting version is listed.

  3. Load and lifting geometry

    Include the load mass and dimensions, load centre, attachment weight and required lift height.

  4. Hydraulic gripping circuit

    Confirm the listed pressure and flow, hose connections and controls for the hydraulic grab.

Product questions

Bale grab questions

What should I check for the hydraulic connection?

The listed working pressure and flow must suit the loader circuit, hoses and controls. Also check bale dimensions against the opening range.

What load information is needed to choose a loader attachment?

Include the load mass and dimensions, load centre, attachment weight and required lift height.

What should I check before installation?

Provide loader make and model, attachment interface and the lifting chart for the intended working position. Match the actual Euro interface; compare SMS separately where a second mounting version is listed.