Xuzhou, Jiangsu, China [email protected] WhatsApp +86 151 6223 2638
Website language
Metric · mm · kg · kWmm · kg · kW
Multi-purpose demolition processor on a white background
Demolition & Cutting ToolsJY-MCR series · Excavator attachment

Multi-purpose demolition processor

A rotating, twin-cylinder demolition attachment with interchangeable jaw arrangements for concrete breaking, separation and cutting suitable metal sections.

Excavator classes
13–48 t, model-specific
Jaw opening
0–900 to 0–1400 mm
Operating pressure
260–320 bar
Request a QuoteChat on WhatsApp
Product & applications

About the multi-purpose demolition processor

A rotating, twin-cylinder demolition attachment with interchangeable jaw arrangements for concrete breaking, separation and cutting suitable metal sections.

Features & benefits

01

Interchangeable jaw arrangements

Different jaw structures adapt the body to concrete demolition, separation or metal cutting.

02

Twin-cylinder actuation

Two hydraulic cylinders operate the jaw assembly for demolition and cutting.

03

Wide jaw opening

The opening range accommodates sections within the selected model’s stated dimensions.

04

High-toughness cutting blades

High-toughness, high-strength steel forms the cutting blades.

05

Side guards

Side protection shields the internal hydraulic lines from contact with debris.

06

Cylinder-rod protection

Protective covers shield the cylinder rod and nearby hydraulic lines.

Typical applications

  • Concrete demolitionBreak suitable building sections using the appropriate demolition jaws.
  • Metal cuttingUse the corresponding cutting jaws for suitable reinforcement and metal sections.
  • Material separationSeparate demolition material using the jaw arrangement suited to the task.
Technical specifications

Demolition processor model specifications

ModelJY-MCR15TJY-MCR120TJY-MCR125TJY-MCR130TJY-MCR150T
Weight (kg)10001500200027005000
Jaw opening (mm)0-9000-9100-9600-11500-1400
Operating pressure (bar)260280300320320
Suitable excavator (ton)13-1820-2222-2528-3735-48
Installation requirements

Confirm the attachment fits your excavator

Before ordering, send the machine identification and the connection, power and working information relevant to this product.

Pin diameters and centre-to-centre distanceClear inside mounting width
D1 / D2
Both pin diameters
C
Pin centre distance
W
Clear mounting width
Pin-on interfaces only. Use the actual machine and attachment drawing.

  1. Excavator and lifting geometry

    Use the selected model’s excavator range and 1000–5000 kg weight; check lifting capacity at the intended reach.

  2. Mounting connection

    Provide pin diameters, pin centres, clear mounting width and any quick-coupler details.

  3. Hydraulic actuation and rotation

    Compare the model-specific 260–320 bar pressure. Provide available flow and rotation circuit details; this specification table does not give oil flow.

  4. Jaw and material

    Identify the required jaw arrangement, material and section dimensions before choosing an opening size.

Product questions

Multi-purpose demolition processor questions

How is it different from a fixed pulverizer?

This body accepts different jaw arrangements. A fixed pulverizer is intended primarily for reducing accessible concrete debris and separating reinforcement.

Can every jaw perform the same work?

No. Match the jaw to concrete breaking, separation or metal cutting; the body alone does not define the cutting capability.

Does the table state hydraulic oil flow?

No. It gives operating pressure, attachment weight, opening and excavator class. Oil flow and rotation requirements must be checked for the selected assembly.

What should I include when requesting a configuration?

Send the machine model, mounting information, material and section dimensions, required jaw arrangement and available hydraulic supply.