Side-grip pile handling
Side clamping positions suitable piles where overhead access is restricted.
Groundwork & PilingJY-SV side-grip series · Excavator attachment
Vibratory pile driver
A side-grip vibratory pile driver for installing and extracting suitable piles. The rotating and tilting head positions piles in confined foundation and infrastructure work.
- Carrier range
- 13–40 t
- Positioning
- 360° rotation / 25° tilt
Product & applications
About the vibratory pile driver
A side-grip vibratory pile driver for installing and extracting suitable piles. The rotating and tilting head positions piles in confined foundation and infrastructure work.
Features & benefits
One-piece clamp jaw
The one-piece clamp mouth supports structural durability.
Rotating and tilting head
Rotation and tilt orient the pile and working head during positioning.
Horizontal rubber isolation
Horizontally arranged rubber mounts isolate vibration between the working assembly and excavator connection.
Typical applications
- Sheet-pile installation and extractionInstall or extract sheet piles within the specified section and gripping limits.
- H-beam and tube pilesHandle suitable H-beams and tubular piles with the corresponding jaw arrangement.
- Timber pile workDrive or extract timber piles within the selected model diameter and weight limits.
Side-grip pile driver specifications
The table applies to the side-grip series shown. Maximum pile length is stated for common soil conditions and does not establish suitability for every ground formation.
| Model | Unit | JY-SV30 | JY-SV40 | JY-SV50 | JY-SV60 | JY-SV70 |
|---|---|---|---|---|---|---|
| Eccentric Moment | kg·m | 3.0 | 4.0 | 5.1 | 6.3 | 7.3 |
| Centrifugal Force | KN | 206-297 | 275-396 | 350-505 | 433-624 | 502-723 |
| Frequency | rpm | 2500-3000 | 2500-3000 | 2500-3000 | 2500-3000 | 2500-3000 |
| Total Weight | T | 1.80 | 2.63 | 2.76 | 3.21 | 3.24 |
| lb | 3968.32 | 5798.16 | 6084.76 | 7076.84 | 7142.98 | |
| Swing/tilt Angle | degree | 360/+25 | 360/+25 | 360/+25 | 360/+25 | 360/+25 |
| Oil Flow | Lpm | 80 | 110 | 165 | 221 | 256 |
| gpm | 21 | 29 | 44 | 58 | 68 | |
| Amplitude | mm | 3.3 | 5 | 6 | 6 | 7 |
| inch | 0.13 | 0.20 | 0.24 | 0.24 | 0.28 | |
| Side Gripping Force | ton | 50 | 50 | 50 | 60 | 60 |
| lb | 110231 | 110231 | 110231 | 132277 | 132277 | |
| Clamping Force | T | 43 | 43 | 43 | 62 | 62 |
| lb | 94799 | 94799 | 94799 | 136686 | 136686 | |
| Arm Stroke | mm | 250 | 250 | 250 | 250 | 250 |
| inch | 9.84 | 9.84 | 9.84 | 9.84 | 9.84 | |
| Dimensions(L*W*H) | mm | 1030x1485x2042 | 1350x1050x2410 | 1350x1050x2410 | 1600x1280x2610 | 1600x1280x2610 |
| inch | 40.55∗58.46∗80.39 | 53.15∗41.34∗94.88 | 53.15∗41.34∗94.88 | 62.99∗50.39∗102.76 | 62.99∗50.39∗102.76 | |
| Excavator | T | 13-18 | 20-23 | 24-27 | 28-33 | 34-40 |
| lb | 28660−39683 | 44092−50706 | 52911−59525 | 61729−72752 | 74957−88185 | |
| Sheet Piles Width | mm | 400-800 | 350-800 | 400-1000 | ||
| inch | 15.75−31.50 | 13.78−31.50 | 15.75−39.37 | |||
| H-Beams | mm | H100- H400 | H200-H500 | H250-H500 | ||
| inch | H3.94−H15.75 | H7.87−H19.69 | H9.84−H19.69 | |||
| Timber Piles | mm | φ220-325 | φ120-400 | φ160-600 | ||
| inch | φ8.66−12.80 | φ4.72−15.75 | φ6.30−23.62 | |||
| Tube Piles | mm | φ90-350 | φ120-400 | φ160-600 | ||
| inch | φ3.54−13.78 | φ4.72−15.75 | φ6.30−23.62 | |||
| Max Pile Length(common soil ) | m | 12 | 12 | 12 | 18 | 18 |
| inch | 472.44 | 472.44 | 472.44 | 708.66 | 708.66 | |
| Max Clamping Pile Weight | kg | 600 | 1000 | 1000 | 1500 | 1500 |
| lb | 1322.77 | 2204.22 | 2204.22 | 3306.93 | 3306.93 | |
Installation requirements
Confirm the attachment fits your excavator
Before ordering, send the machine identification and the connection, power and working information relevant to this product.
- D1 / D2
- Both pin diameters
- C
- Pin centre distance
- W
- Clear mounting width
Excavator weight and lifting capacity
Check driver weight, maximum clamped pile weight and the actual lifting chart at the working radius.
Hydraulic and control circuits
Match supply flow, pressure, rotation, tilt and clamp controls to the driver installation instructions.
Pile section and length
Provide sheet width or beam/tube/timber dimensions, pile length and pile weight.
Ground and site access
Describe soil layers, obstructions, vibration restrictions and the clearance required to handle the pile.
Product questions
Vibratory pile driver questions
Is a pile driver the same as a pile breaker?
No. A driver installs or extracts piles by vibration. A pile breaker removes concrete from pile heads.
Does the stated maximum pile length apply to every site?
No. The maximum pile-length figure is specified for ordinary soil. Ground conditions, pile section, access and the selected driver affect suitability.
Can I choose using excavator weight alone?
No. Also confirm the actual mounting connection, attachment weight and excavator lifting capacity. Powered tools need the specified hydraulic supply.
Which information is needed for a quotation?
Send the excavator model, mounting dimensions, work requirements, quantity and delivery destination.
Compare other foundation-working attachments
Augers & Drilling Tools
Auger drive
Provide rotary power to a compatible auger through a hydraulic drive unit.
Groundwork & Piling
Compaction wheel
An excavator-mounted compaction wheel for soil and aggregate preparation. The regular and open-tooth arrangements have separate model tables and carrier ranges.
Groundwork & Piling
Pile breaker
A hydraulically operated attachment for removing concrete pile heads. Circular modular and square-pile arrangements position crushing rods around the pile; select the layout for pile shape, dimensions and reinforcement.